Project status
Completed
Start date: 07/01/00
End date: 06/30/01
Researcher(s)
Principal investigators:
Co-principal investigators:
- Zachary Hans | 515-294-2329 | zhans@iastate.edu (project list)
- Tom McDonald | 515-294-6384 | tmcdonal@iastate.edu (project list)
- Ali Kamyab
Other authors: Tom Welch, Iowa DOT
About the research
The value of providing paved shoulders adjacent to many higher volume roadways has been accepted in many states across the country. Iowas paved shoulder policy is considerably more conservative than neighboring states, particularly on rural four-lane and high-volume two-lane highways.
The objectives of this research were to examine current design criteria for shoulders employed in Iowa and surrounding states, compare benefits and costs of alternative surface types and widths, and make recommendations based on this analysis for consideration in future design policies for primary highway in Iowa.
The report finds that many safety and maintenance benefits would result from enhancing Iowas paved shoulder and rumble strip design practices for freeways, expressways, and Super 2 highway corridors. The benefits of paved shoulders include reduced numbers of certain crashes, higher capacity potentials, reduced maintenance, enhanced opportunities for other users such as bicyclists, and even possible increased longevity of pavements. Alternative paved shoulder policies and programming strategies are also offered, with detailed assessments of the benefits, costs, and budget impacts.
Reports:
- Paved Shoulders on Primary Highways in Iowa: An Analysis of Shoulder Surfacing Criteria, Costs, and Benefits, Executive summary (56 kb pdf) November 2001
- Paved Shoulders on Primary Highways in Iowa: An Analysis of Shoulder Surfacing Criteria, Costs, and Benefits, Final report (326 kb pdf) November 2001
Sponsor(s)/partner(s)
Sponsor(s): Iowa Department of Transportation